Boiler Install - Elite Premier

Posted by HTP on May 25, 2017 9:53:49 AM

We recently received another great install, this time from Kris with Tasse's Fuel out of SouthBridge, MAThis install features our Elite Premier Boiler with 9 zones and 220k BTUS.  

The Elite Premier is a low mass boiler with a 316L stainless steel heat exchanger. This versatile unit has an impressive range with seven models reaching up to 399,000 BTUs. This flooor standing or wall mount system is good for both residential and commercial applications. It is 96% efficient with a 10 to 1 turndown ratio. It vents in inexpensive, easy-to-install PVC pip, up to 200 combined feet; no primary/secondary piping is required. 

Check out the photo below. If you would like your install featured e-mail us at marketing@htproducts.com.

Boiler Install.jpg

Read More

Topics: HTP Installations

We're Ready for Our Close Up

Posted by HTP on Apr 4, 2017 4:00:00 PM

Recently, HTP's very own SSU was featured on a popular PBS show, This Old House. This Old House is the Number 1 multimedia home enthusiast brand offering trusted information and expert advice through award winning television, a highly regarded magazine and an information driven website.

The video that features our SSU is a tutorial on how to properly  install an indirect water heater on a boiler. The SuperStor Ultra indirect water heat is a culmination of over 30 years of indirect system manufacturing experience. The 316L stainless steel tank resists corrosion and eliminates the need for anode rods, allowing for the system to be virtually maintenance free. The heater draws energy from a boiler and thus does not need its own heat source. Hot boiler water flows through an internal heat exchanger in the tank, heating the domestic water. The SuperStor boasts three to five times more recovery than conventional gas-fired or electric water heaters.

 

Check out the SSU's television debut below!

 

 

 

 

Read More

Topics: HTP Installations

Check Out This Impressive Install!

Posted by HTP on Mar 23, 2017 10:00:00 AM

We LOVE seeing our units in action, which is why we can't help but show off a great installation when we see one (or two in this case). We received these photos below from our friends over at Steele Brothers Heating in Denver, CO. Their service technician, Chris, did a wonderful job with the installation of not just one, but TWO of our boilers; the UFT and the EFT.

Our UFT Boiler is a medium mass high efficiency boiler. This advanced modulating gas condensing boiler has a 316L stainless steel fire tube heat exchanger with a 96% AFUE rating. It is equipped with a state of the art gas leak detector and has ultra-low NOx emissions, making the UFT eco-friendly and your best option in today's green market.

Steele Bros. Trade Magazine Installation Photo 1 UFT.jpg

The second installation photo features our EFT boiler. The Elite FT is a high efficiency heating boiler for residential and commercial applications. This versatile unit is wall hung and comes in seven models, ranging from 55,000 to 399,000 BTUs. It’s exclusively designed stainless steel heat exchanger provides superior heat transfer. It has up to a 96.8% AFUE rating with a five to one turndown ratio. Top and bottom connections are featured on larger size units for greater installation options.

 

Steele Bros. Trade Magazine Installation Photo 2.jpg

 

Check out our website here for more information on these boilers and much more. If you have a great install and would like to see it featured here and on our social media pages e-mail your photos to us at marketing@htproducts.com.

Read More

Topics: Water Heating, Space Heating, HTP Installations

Warming Up at Pine Street Inn

Posted by HTP on Jan 9, 2017 3:00:00 PM

Our friends at the Massachusetts Clean Energy Center recently visited a solar hot water project that they funded at the Pine Street Inn permanent housing facility. While taking a look around they noticed an HTP SSU Indirect Tank installed! How great is that?


The SSU Indirect Tank is a culmination of over 30 years of indirect system manufacturing experience. The 316L stainless steel tank resists corrosion and eliminates the need for anode rods, allowing for the system to be virtually maintenance free. The heater draws energy from a boiler and thus does not need its own heat source. Hot boiler water flows through an internal heat exchanger in the tank, heating the domestic water. The SuperStor boasts three to five times more recovery than conventional gas-fired or electric water heaters.

 

Check out the photo of the install below! Photo courtesy of Jessica Ridlen of the MassCEC

PineStreet Inn Tank.jpg

Read More

Topics: HTP Installations

Check out this Install

Posted by HTP on Jan 4, 2017 3:00:00 PM

We love when we are sent installs of our products! Below are photos of our UFT, SSP, and our SSU20B.

The UFT Boiler is a medium mass high efficiency boiler. This advanced modulation gas condensing boiler has a 316L stainless steel fire tube heat exchanger with a 96% AFUE rating. It is equipped with a sate of the art gas leak detector and has ultra-low NOx emissions, making it eco-friendly!

Our SSP, or SuperStor Pro is a high efficiency indirect water heater. It is built using high quality 316L stainless steel materials, eliminating the need for anode rods, easily resisting corrosion for a longer tank life and making is virtually maintenance free. The SSP generates over 50% more hot water than many water heaters of similar size and offers extreme savings.

HTP's Superstor Ultra's indirect water heat is a culmination of over 30 years of indirect system manufacturing experience. The 316L stainless steel tank resists corrosion and eliminates the need for anode rods. The heater draws energy from a boiler and does not need its own heat source.

 

Check them out in action below, sent in from John Lanagan of Lanagans Plumbing NJMPL# 10329

Instagram: @langanjohn

 

image2.jpg

Image3-1.png

 

 

 

 

 

 

 

 

 

 

 

Read More

Topics: Water Heating, HTP Installations

Subscribe to Email Updates